The cladding of a private house is an important final stage of construction. And at this stage, most developers choose the cheapest facade decoration of the house. Why it happens?
On the one hand, the cladding of one's own home must comply with all standards of reliability and aesthetics, and on the other, it is obvious that it is not worth throwing a large amount of money down the drain, without guarantees that such a decision will be fully justified.
Only one family out of ten can afford to choose any finishing option, regardless of its high cost. The remaining 9 families, and this is 90 percent of developers, are trying to save as much as possible and choose the cheapest way to decorate the facade, sometimes even at the expense of functionality and visual beauty.
Going to extremes is also not the best option. If we focus on the most budgetary option, then you can lose on the performance characteristics of the facing material. As a result, it will not resist well to unfavorable natural conditions, such as: wind, frost, snow, rain. On this score, there is a saying "the miser pays twice."
Cheap cladding of the facade of the house is quite real, you just need to choose the most optimal option, the cheaper it is to finish the facade of the house, which takes into account all the best characteristics of the material. In order to competently decorate your home, while saving good money, you should decide on the main aspects of the choice of material. If you buy a good and reliable finishing material, then this is already 50% of success.
The choice of facing material
When choosing, you need to know that mainly pay attention to the aesthetic characteristics already. There is no doubt that the "beauty" of such a cladding is a very subjective question, because it depends on the individual preferences of each owner.
Nevertheless, there are such parameters of facing materials that will not be ignored in any case. You can choose the cheapest material for the facade, you just need to take a closer look at such criteria as:
- availability of color lines provided by the manufacturer of the facade material;
- parameters of resistance to fading and external defects;
- from what raw materials the finishing material is made, including what it has with environmental friendliness.
Another important criterion is the durability of the facade. When choosing an inexpensive material, you need to make sure its strength so that it does not have to be changed every year. Because the cheap cladding of the facade of the house, initially low-cost, can turn into annual renovations or repairs, which will hurt the wallet of the thrifty owner.
The total cost of installation of facade materials
How to get a brick cheap? Buy a good brick with minor defects. This can be done in the factory, or you can buy leftovers from a dealer in the warehouse.
Choosing this inexpensive facing material, you can not be afraid that the facade of the house will fade. The only drawback is that there is a chance of efflorescence.
Ceramic tile
The prices for the material are quite low, and the tile itself is a reliable material, so facing the house with ceramic bricks will fully justify the money invested. Tiles are installed, as a rule, for a long time, but with the necessary information on the installation of facing bricks, work can be performed in the range from 5 to 8 weeks.
Facade tinted soil
Facade primer is a material that has become very popular in facade decoration in a very short time. If the facade of the house is plastered in advance, then it is best to use a deep penetration primer for cladding private housing. For, which is impregnated with an antiseptic to avoid the appearance of harmful beetles.
As you know, the appearance of the house should create a feeling of comfort and coziness. Therefore, do not save too much, as this can adversely affect the integrity of the house in the future.
Thermal panels
Another economical option is thermal panels. The facade of this material has a lot of advantages, since it uses dense polystyrene foam in its manufacture, which contributes to excellent thermal insulation. In the summer, the house will be cool, and in the winter the warmth will not leave the house.
Installation of thermal panels is carried out using ordinary self-tapping screws, so almost everyone will be able to carry out the installation on their own in the shortest possible time.
Another worthy advantage is that the panels can be installed at any time of the year, since the material has increased strength.
A natural stone
It is not at all an economical option to clad the facade with natural stone. However, where there is an opportunity to get this facade material virtually free of charge, this will be the cheapest way to decorate the facade.
Where to get natural stone almost free? Drive to the nearest quarry with your own trailer, or try to buy a stone with minor defects from a dealer.
You can also buy leftover stone after cladding large houses. If your house is small, then the leftovers from the cladding of a large house will be enough for you to make.
A house made with this particular material will look very beautiful. The stone will give it a very original and unique aesthetic appearance. The technology of facing a house with a stone is very simple.
First you need to prepare the base. This stage includes leveling the surface of the plinth using ordinary plaster. Then you need to install extruded polystyrene foam on its surface. It is fastened with self-tapping screws or dowels. Next, an acrylic primer should be applied to the surface of the slabs. The preparatory work ends with the fact that a steel mesh is installed on the wall.
Then you need to decide on a mosaic that will be made of stone. You can draw a plan in advance so as not to make mistakes in the process of work. You should try very hard, since the appearance of the facade depends on this. Next, you need to wipe the seams and joints with a solution. After the end of the work, experts advise to apply a special varnish to the stone to make the color of the material brighter and more saturated.
Also, in this way, you can protect the walls from wind, rain and frost. Facade cladding with natural stone will be the most reliable and, at the same time,.
Output. The cheapest finishing of the facade of the house is possible if you have chosen the cheapest material for the facade or the material, during the installation of which you can save money.
Also, if you have the opportunity to very cheaply get an expensive facing material, it is he who will give you the opportunity to make an expensive facade of the house cheaply.
See if you have the opportunity to take out substandard natural stone or decorative brick with defects for little money. For these materials, small defects are not critical, but such a facade will be mounted for centuries, and it will look very impressive.
-
So, you choose the materials that can be used to clad the facade of the house. What's the best material? Photos of different facades with different materials used will help you solve this ... -
The saying "Meet by dress" applies not only to people, but also to their homes. Therefore, the facade of the house plays an important role for its owners, since ...
The most common version of jumpers is those made of reinforced aerated concrete. This is the most common way. Ready-made lintels for aerated concrete blocks are an independent load-bearing part, ...
