The facade of a building is the first thing that catches our eye when we see a house.
The facade should be selected not only according to aesthetic criteria, but also according to technical characteristics.
Menu:
There are many materials for facade decoration on the modern market. Consider the newest types of facing materials.
Finishing the facades of wooden houses
Wooden facades are best suited for houses in the southern regions. In other cases, you will have to treat the siding plates with protective solutions, which requires a considerable investment.
On the other hand, if good quality and home comfort are more important for you than the price of finishing, a wooden facade is just for you, because after good processing it can be used even in regions with a large temperature difference.
Siding is installed at some distance from the wall. The void is filled with thermal insulation material.
The air that circulates between the wall and the finishing material prevents moisture from condensing on the wall surface.
The most common types of profiled siding are herringbone and shipboard. 
High-pressure laminate panels are considered to be a fairly new finishing material.
They are made from thin cellulose sheets pressed under high pressure. The thickness of the panels is 6-15 mm. They have good bending resistance.
Such panels are covered with a special varnish that protects them from external influences. Any image or texture can be placed under the varnish.
This type of finish is ideal for balconies and individual residential or small office buildings.
Facade molded panels
Molded panels can be used both in the facades of private houses and in multi-storey buildings.
They are made of polymers by casting and have a long service life. The panels withstand temperatures from -50 0 C to +60 0 C, so they can be used in regions with any climate.
The panels can imitate brick and stone, they are easily mistaken for a natural material.
They are not susceptible to corrosion and deformation, they are difficult to bend or break. The panels are attached to the frame with self-tapping screws.
Among their advantages are not only low cost and reliability, but also ease of maintenance - wet cleaning is enough, periodic updating is not required.
Facade decoration with clinker tiles
Clinker tiles are made from fired elastic clay. It does not contain chalk and salts.
In appearance, such a tile imitates a brick, but has a much lower weight. It practically does not absorb moisture, which prevents it from cracking and salt outflows from cement-sand mortars.
This tile is easy to clean.
Facade clinker thermal panels are excellent for finishing the facades of private houses, as they retain heat well. They can also be used for finishing multi-storey buildings.
ceramic plate
Ceramic slab is obtained by molding and firing natural clay. You can orient this plate horizontally and vertically.
It has extreme frost resistance, so it is perfect for residents of cold regions. 
The tile gives the minimum load on the foundation, because it is light in weight. The material has high water resistance, strength and thermal conductivity, resistant to aggressive environments.
Ceramic tiles are equally suitable for facing one- and multi-storey buildings.
Concrete siding for facades
Concrete siding is made from white cement, sand and dyes. Perfectly is suitable for facing of multystoried buildings, cottages, industrial and trade objects.
Thermal insulation material can be laid between the frame rails. Concrete siding can be used not only for the construction of new buildings, but also for the renovation of old ones.
Concrete siding is non-flammable, so it is great for buildings with high fire safety requirements.
Facades of multi-storey buildings
When facing the facades of private residential buildings, you can use almost any type of finish. If we are talking about high-rise buildings, then the materials will be somewhat limited.
In addition, glazing or composite aluminum panels are more often used to decorate the facades of buildings of large companies, since such buildings must have a presentable appearance.
Also, in ventilated type structures, facades with a ceramic magnet are often used. This material increases the waterproofing properties of the building, provides resistance to low temperatures and environmental influences.
The simplest and most economical material for facing multi-storey buildings is plaster. It improves sound insulation properties and does not weigh down the foundation.
Thus, with a modern rich selection of finishing materials, you can easily choose the most optimal option for you.
